BCD 2000
dj controller

Saturday, June 16, 2007

BCD2000 and Vista works togheter!


Our friend ZeDd have written a useful post into Xylio forum, to explain how to install BCD 2000 on Windows Vista in properly mode.

First of all, I installed the old driver and the software from the cd. Then i did both upgrades. (driver 1.1.1 + software 1.2). Then i did a reboot. With no reboot, the driver won't load ! After the reboot, i plugged my bcd2000 with the USB-cable. Device detected and Vista is installing my device properly. Reboot again! After this second reboot, the driver is loaded (icon of behringer visible on right lower corner) I load VDJ and the leds on my BCD2000 are activated. (just like with XP) I did a quick setup of the midi-setting, latency, etc , no special things. I selected song, press play ... and the plays trough my headphone!!! no lag, no latency, no crops, nothing....

64 Comments:

Anonymous Anonymous said...

What version of Vista? I've tried this on 64 bit Vista Ultimate and had no joy :(

6:46 PM  
Blogger bcd2000 said...

@anonimous

Tried on Vista 32 bit.

:-(

Dj Gas

11:59 PM  
Anonymous Anonymous said...

running it on 32 bit and getting freeze ups on my bcd and tracktor LE :(

1:07 PM  
Blogger albin said...

where can i donwload update driver and soft ?
Albin

11:45 AM  
Blogger bcd2000 said...

@albin
Behringer have not relesead Vista driver yet.
But with the tips and trick of this post is possible to install bcd2000 on Vista 32 bit.
Read the post carefully and try.
Otherwise plese write to Behringer.

Bye
Dj Gas

11:57 PM  
Anonymous Anonymous said...

I've installed the BCD2000 in Vista. If finds it. But when i start Deckadance, and loads up Midi options, I get the "cool blue background" and the computer restarts.

Is there anyway to output all sound through the BCD2000, in sound options or something?

Reg. Mats

2:44 AM  
Anonymous Anonymous said...

Nevermind :)

I got Traktor to work in Vista :)

Reg. Mats

2:57 AM  
Anonymous Anonymous said...

I have Windows Vista Home Edtion + BCD3000. Works totally fine together :-) I don't even have problems concerning anti virus software or Wlan connection!

11:38 AM  
Anonymous Anonymous said...

Great!
I just got my BCD2000 working with Vista. I followed the instructions, except I didnt install BDJ. Im using only VDJ.
Only problem is the LED's wont light up :(

7:12 AM  
Blogger Lasse said...

I misplaced my driver cd, where can I find the original drivers? (if I really need them as a starting point)

11:12 AM  
Blogger bcd2000 said...

@Lasse

Please send me an email to:

bcd2000@gmail.com

I'll send you a download link to original cd.

Bye
Dj Gas

12:39 AM  
Anonymous Anonymous said...

hi to all.. I'm having problems with vista even with the instructions.
what version of vdj you use!! do you use ASIO?? what are the options in the vdj menu?? thanks for the help

3:04 AM  
Blogger riep said...

hi there....is it necessary to install the software and drivers from the first version of the bcd2000? if yes , where can i find them,i lost the cd...thanks

4:28 AM  
Blogger bcd2000 said...

@riep

Please send me an email at
bcd2000@gmail.com

bye
DjGas

12:16 AM  
Anonymous Anonymous said...

Thanx a lot! It worked out!!!

10:54 AM  
Anonymous Anonymous said...

kiftktutHello
I have problems with my driver if behringer active in sight but the only program I have the VDJ 1.1, and the programme of virtual dj crashes after a few minutes, as I Vaja driver updates and programme of my behringer, aid

12:48 AM  
Blogger bcd2000 said...

@kiftktut

Sorry, but I did'n understand, what are you asking me.
Can you write again, more clear, please?

Tnx
Dj Gas

12:01 AM  
Anonymous Anonymous said...

I installed my BCD2000 and updated its drivers. I configured it to work with VDJ5 (with the mapper) but none of the LED lights will light up and I can't use it at all.

I plug in the USB, my computer detects it, then it says:

"A problem occurred during hardware installation."

Any thoughts?

9:56 PM  
Anonymous Anonymous said...

Hi plz help me

Ive got a BCD 3000

but none of the led lights will light up
everything else works perfect but the lights

plz help me

3:46 PM  
Blogger Jefferson said...

do you have a Behringer BCD 3000 Mapper tool by Max Mora for Virtual DJ for Windows ? Please can you send me pls. Here's my email address jkmbalboa@gmail.com. Please attach. Thanx

7:33 AM  
Anonymous TBONE said...

Hi, I've installed succesfully, but when I try to update to version 1.1.1.0 the only option that appear is "CLOSE". I turned on and off several times, a lot of restarts and nothing happens. There is other way to acchive this instalation?

Tks a lot!

4:56 PM  
Anonymous LIAM said...

This worked for me with a BCD2000 and vista 32 bit:
* download the latest xp drivers from the behringer site
* right click and choose properties on the drivers setup
* go the the compatability tab and choose compatability mode for windows xp
* now run the setup and it should just install normally

should help some of you.

11:19 AM  
Blogger Max said...

can I use the B - DJ with Vista ?

3:05 PM  
Anonymous Herman said...

Use "compatibilty Option" Windows XP SP2
Right Click "BCD2000-driver-setup-1-1-1-0.exe" -> Properties -> Compatibility tab

8:43 AM  
Blogger Fabian said...

Jungs... schonmal was vom Kompatibilitätsmodus gehört? ;-)

7:54 AM  
Anonymous Ceekorqa said...

Hello, I tried to run BCD2000 on 32-bit Vista on laptop. I did everything what was said in the article, but no success... Why don't Behringer release any official Vista drivers? I think it's a little bit stupid to sell some products which aren't supported on actual operating system... :(
Ceekorqa

4:30 AM  
Anonymous Anonymous said...

www.xylio.com

has some drivers

4:26 AM  
Anonymous Anonymous said...

It seems that behringer and xylio have fallen out and therefore xylio won't now support behringer. Xylio are(Ihave been told)looking to keep supporting but through charging for their software. It seems a shame that behringer cannot/wont talk to xylio or release a vista driver for the BCD2000 either by themselves or through a 3rd party.
After dowloading 1.1.1 I managed to get the lights working and all the sliders etc. However I seem to have the right channel coming out through the headphone socket and the left hand channel coming out the back. it seems no matter where I look I cant find a fix. I did download bj.1.2 but this resulted in completely distorted sound. so had to completely uninstall and re-install again.
It also seems odd that that vista wont see this and even in in the xp mode it wont recognise the Future decks pro software correctly. i thjink it is time to start bobmbarding behringer with emails to get this!!!!!!!!
currently using future decks pro at the moment.without the mixer which is completely useless.

Its like a one legged man entering an arse kicking competion, A lost cause at the moment.

11:52 AM  
Anonymous Anonymous said...

I tried installing bcd2000 on my vista home premium as per the steps.
But not getting sound and play button is not working.

DJ Raza..

12:41 AM  
Anonymous zain said...

I have windows Vista 64 bit and cannot seem to install the driver for my BCD 2000. does this method work on 64 bit as well?

5:29 AM  
Anonymous Anonymous said...

Easy to get the BCD2000 working on vista! Right click on the bcd2kcpan.exe, choose properties, compatibillity tab at the top and change it to windows XP. Everything works.

If using PCDJ VJ you may have to do the same aswell!

7:53 AM  
Blogger rj.reyes05 said...

Hello... Im Jhulez
I have a BCD 2000 and im using Windows Vista 64 Bit.

I have this BCD 2000 since last month im still wondering if how to install this to Vista 64 Bit.

Thanks..

4:39 AM  
Blogger Michael said...

Hey All!I had the same problem with BCD2000 running in Vista,Windows 7 all 32bit!
What i did to make it work is :
1)Remove BCD2000 in device manager under sound.
2)Right click the BCD2000 driver setup executable,under compatibility
choose Windows XP SP3,run as administrator.
3)Run the file as administrator,restart after the installation.

Good Luck
MikE

9:20 PM  
Anonymous Anonymous said...

BCD 2000 DOESN'T WORK - DON'T BOTHER ABOUT IT!

8:40 PM  
Anonymous Anonymous said...

BCD 2000 - Behringer customer service is a joke and the product is the same.

Get your act together and update your BCD 2000 Vista drivers Behringer or recall this rubbish product and give people their money back.

8:49 PM  
Anonymous Anonymous said...

OK something you all might want to check is after you install. go into device manager and look for BCD2000 under sound. see if it working properly, if not disable it and then enable it. works for me :)

dj s-fly

9:30 PM  
Anonymous Anonymous said...

Well.. The best way to run BCD2000 is on Win XP ,it runs perfectly on it! So best way run it,is to dual boot your OS! I just run BCD2000 on XP,that is the only reason I have XP installed!

12:13 AM  
Anonymous Liam said...

No need for dual boots or anything else like that - I posted the solution about a year ago and it's simple!
- download the latest behringer xp drivers from their site
- once downloaded, right click on the file and choose properties
- go to the compatability tab and under 'run this program in compatability mode' select windows xp
- click ok to close and it should now install normally

Definately works for vista, not tried 7 but I assume it would work the same. Might be worth updating the original post.

3:49 PM  
Blogger joris_wanten said...

heyj!
I've got a BCD2000 at vista, but a problem whene I wanna start B-DJ :
ERROR: can not find the B-control DEEJAY!
Please connect the B-control DEEJAY to the computer, power it and try agin.

but the computer reads the BCD2000 whene i activate it.

2:31 AM  
Anonymous DJ-Foxxel said...

Hey I have the BCD2000 on my laptop which it has Vista 64bit...
Now Behringer says that it won't work on 64bit But I HAVE seen it work on 64bit before. Is there a way (Meaning: Does any one know) how to get it to work on 64bit?

9:00 AM  
Anonymous Anonymous said...

i tried this and it works!
but when i use it b-dj the sound keeps jumping!then it freezes!
in vdj it works and plays the song then stops playing it and wont let me re play it! any help?
Darragh!

2:21 PM  
Blogger Elepsy said...

Works good, small -
What i did to make it work is :
1)Remove BCD2000 in device manager under sound.
2)Right click the BCD2000 driver setup executable,under compatibility
choose Windows XP SP3,run as administrator.
3)Run the file as administrator,restart after the installation.

8:49 AM  
Anonymous Anonymous said...

will this work for wndow 7 32 bt as well? what are the procedures? tnx

11:53 PM  
Anonymous Anonymous said...

will this work for wndow 7 32 bt as well? what are the procedures? tnx

11:53 PM  
Anonymous Anonymous said...

After some serching on this I went onto the xylio site http://www.behringer.com/EN/Support/B-Control-Downloads.aspxdownloaded the software, then connected the mixer and downloaded the midi drivers on to it. then rebooted. this has resulted in the best result with all buttons working proprly now. only thing is i have to double tap all buttons to make them work, much like a mouse. If i can resolve this i will be so happy.

any ideas on this?

12:22 PM  
Blogger Gary said...

my bcd2000 is installed on vista and im trying to use it with vdj, everything lights up, faders work and all knobs etc but the jog dials wont work and it wont start the tracks, its like the soundcard in it isnt compatible, any ideas??? gary

7:46 AM  
Anonymous Anonymous said...

hi im having trouble with my bcd2000.i am running vista 32bit, i have installed the driver etc.i plug in the controller,run virtual dj or numark 5.0(i have both)and set the sound up,press play on the controller and nothing!! i can press play on the software and it plays?sound comes through the bcd2000 but just cant seem to get the functions working on the controller??i know its sync'in with the laptop because of the icons are there??i am totally confused?please help me remedy this problem.
many thanks
djpinky2k

5:19 PM  
Blogger masher12 said...

i misplaced my original disk an got a new computer and i need the software as the starting point where can i find this?

8:48 PM  
Anonymous Anonymous said...

behringer is not serious. why the driver for all windows is not available? like win 7 64 bit. i looking for it every day.. and i dont know if ever appears. why is the purpose of this. probably to rise the sell of the bcd 3000 more than bcd 2000, but b3000 is not working on win 7 64 to. maybe behringer is not the best choice for me.

5:54 AM  
Anonymous DJ Ansh PsyNide said...

Driver Released for 64 Bit (VISTA). :)

http://www.behringer.com/EN/Support/B-Control-Downloads.aspx

12:45 AM  
Anonymous Hydrodoc09 said...

ok my problem is that i cannot get this BCD2000 to install on my computer. I have vista 64 bit and i have done everything i can think of to have it install but no such luck. Does anyone have a solution?

10:16 AM  
Anonymous Anonymous said...

hello i missplaced my bcd2000 driver cd.and i use windows 7.pls who can give me the link where i can download the driver that works well with windows 7.thank you

10:26 PM  
Anonymous Anonymous said...

hello i missplace my bcd 2000 driver software and i use windows 7 pls who can help me with the link on how to download the driver that will work very well for my windows 7.....

10:27 PM  
Blogger bikram said...

Hi I've tried bcd2000 on xp &win 7 ,it works smoothly.Pls remember ,first install the updated driver,shut down windows,remove bcd from usb,start windows ,when windows show all icons then connect bcd on the same usb port on which it was before ,now,turn it on ,waite for 2 minutes ,now turn on your tractor /vdj/bdj ,move the faders & spin the music pls be calm ,no hurry ,it will work & its sound is the best if compared with other dj controllers

dj Vicky (INDIA) using bcd for 4yrs

1:12 PM  
Anonymous Anonymous said...

installing it using the xp compatibility tab worked wonders thanks for the advice, and whats with the hate on this thing, its been working fine for me except the jogwheel doesnt work but oh well, for the price of a midi controller i got an audio interface too, saved a whole lot of money

8:21 PM  
Blogger highlu said...

Hello, i just a bought a new notebook with windows 7 - 64 bit. Can i still use my bcd2000 now ? where can i download software and driver for windows 7 ? Thanks a lot... Luca

6:33 PM  
Anonymous Anonymous said...

hey would this work on windows 7 64bit?? if so plzz tell me ASAP plzz email me at modernsocietyent@hotmailmail.com thxx

11:14 AM  
Anonymous Anonymous said...

hey would this work on windows 7 64bit?? if so plzz tell me ASAP plzz email me at modernsocietyent@hotmailmail.com thxx

11:15 AM  
Anonymous Anonymous said...

i lost my cd installer some body can help me to get another cd THANKS my email is ligaazteca@hotmail.com

8:15 AM  
Anonymous Anonymous said...

fuck you all!!!.

7:52 PM  
Anonymous Anonymous said...

fuck the guy who fucks all

2:19 AM  
Blogger Rusty Hall said...

why doesn't behringer make a cd that can let you play bcd2000 for windows 7 64 bit. why should I go out and buy another mixer for it to work on windows 7.
I find this very insulting, and if behringer doesn't buck their ideas up and I can see people disowning behringer for another model.
please support our needs behringer and it doesn't have to be a cd just a download would do for us users

3:14 AM  
Blogger Rusty Hall said...

why doesn't behringer make a cd that can let you play bcd2000 for windows 7 64 bit. why should I go out and buy another mixer for it to work on windows 7.
I find this very insulting, and if behringer doesn't buck their ideas up and I can see people disowning behringer for another model.
please support our needs behringer and it doesn't have to be a cd just a download would do for us users

3:14 AM  
Blogger Rusty Hall said...

why doesn't behringer make a cd that can let you play bcd2000 for windows 7 64 bit. why should I go out and buy another mixer for it to work on windows 7.
I find this very insulting, and if behringer doesn't buck their ideas up and I can see people disowning behringer for another model.
please support our needs behringer and it doesn't have to be a cd just a download would do for us users

3:15 AM  

Post a Comment

<< Home

 


Software Test
  • Deckadance
  • Ultramixer 2
  • Future Decks Pro
  • B-DJ
  • Virtual DJ 4.1
  • Traktor 3
  • Visual Disco Mix
  • Dj Decks 0.76
  • Mix Vibes 6
  • DJ System MKII
  • Ableton Live 5


  • Ads by Google